Uto Design

Website Contact the business

Uto Design Ideas printed to life - check also my instagram profile 🙂
Unique, Sustainable, 3D printed

15/10/2026

Tiles are everywhere! So I try to make a 3D printed tile lamp. Let me know what you think, if you want you can print it yourself, stl is on and for the rest use the socket and cable from your local hardware store!

13/10/2026

Tuesday tip for a 3D printing number 7!
Hole compensation is the setting in the slicer that I did not know about for a long time! After I discovered it, it changed the way how I create designs! Check my demostration and save a tip for later!
All my models are available on
Check the link in my bio for codes, stl and much more!

06/10/2026

Tip NR.6 for 3D printing
Filament infill is tricky settings to understand but it does not have to be like that. Watch my explanation and if you find it helpfull please follow and save it for your next print. All my designes are available on

29/09/2026

Not every 3d printed part need finer settings. Most of the time you are fine with 0.2 layer height profile. Using lower profiles result in much longer printing time and trust me on this, you even wouldn’t know the difference. Follow me for more tips for 3D printing
This lamp design is available on

Easy assembly guide of my mushroomie lamp. DIY which you can make happen with your 3d printer. Stl is available on Thang...
24/09/2026

Easy assembly guide of my mushroomie lamp. DIY which you can make happen with your 3d printer. Stl is available on Thangs 3D


3D Print the lampshade upside down - if you want add some texture in slicer. Turn on supports

3D Print the base where all the electronics sits. Turn on supports and again if you want you can add texture.

Last part to 3D print, the bottom cap, no support needed and do not add textures so the cap will fit inside the base.

Use E14 socket. Idealy from Ikea (hemma)

Thread the cable through the base and the holes in base and lampshade, secure with a “nut”.
You can add wheight on the bottom, try to find big washer in your local hardware store

That’s it. Enjoy your new lamp

22/09/2026

Tuesday Tip nr. 4
Aometimes for a better result I have to change the model, simple changing the flat surfsces to inclined one can change the whole printing. Time, waste even the finished result is at stakes when using supports. I showcase this tip on my own designed lamp which is available on s Follow me for more tips for 3d printing.

Address

Bratislava
84105

Website

Alerts

Be the first to know and let us send you an email when Uto Design posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Uto Design:

Shortcuts

Share

Category