Valley Clock and Watch Repair

03/22/2013

This clock was another clock manufacture in Montreal QC, by beard company. Later on set up in US alonge with Montreal factory. Afterwards, everything moved to NY. This is the first clock manufacture that started advertizements on their clock cases.

03/21/2013

Canadian manufacture in the 1800. Was called Berlin Canada which after ww1 was changed to Kitchener Ontario because Canada did not want to be associated with Berlin Germany.

12/15/2012

Have some new very old antique clock being worked on. Will post some pics as I get them repaired.

11/19/2012

Some people spry a lubercant on a clock movement, most cases this gets the clock to run as it has softend the old oil. But this only causes more damage as the particals are still on the pivots and causes further damage to the plate and pivot.

11/18/2012

By waiting to long to have your clocks cleaned, the oil begins to sulitify and particals in the air stick to it and becomes black and past like which acts like a fine obrasive and cuts into the brass plate causing a egg shape hole till the gear binds with the next one and also damaging the steel piviot on the gear shaft. That makes for more cost to repair.

11/15/2012

By servicing clocks more frequently it will save on costly repairs and improve the life of the clock.

11/14/2012

clocks should be serviced/ repaired every five to seven years and
in poor environments every three years.

10/26/2012

Have any clocks needing repairs? I Will repair antique clocks and pocket watches, also newer quartz clocks and watches.

10/26/2012