Ai-Thinker

Ai-Thinker Founded in 2012, AiThinker Technology Limited provides one-stop IoT solutions, including wireless modules, antennas, RF testing, cloud, and PCBA services.

03/09/2026

Voice Control and Bluetooth in One Module? Yes! That's it.

Need offline voice control and a Bluetooth connection in the same device?Ai-BV01-32S supports ASR, audio noise reduction...
02/09/2026

Need offline voice control and a Bluetooth connection in the same device?

Ai-BV01-32S supports ASR, audio noise reduction and echo cancellation, together with Bluetooth 5.4, BR/EDR and BLE.

What kind of device would you build with it? 👇

If you could make one device listen and talk, what would you build?Ai-Thinker’s XiaoAn AI Voice DIY Challenge is now ope...
01/09/2026

If you could make one device listen and talk, what would you build?

Ai-Thinker’s XiaoAn AI Voice DIY Challenge is now open to overseas developers.

Submit an idea for a talking robot, voice-controlled home device, smart speaker, talking sensor, or an original voice-enabled project of your own.

This is an application-based activity with five spots. Selected participants who complete the required open-source project and pass review will receive:

• USD 60
• Another XiaoAn AI development board
• Free international shipping for the bonus board

Featured projects receive an additional USD 20.

Project submission deadline: October 15, 2026, 23:59 UTC.

Apply here:
https://forms.gle/35ANaSAjTibuVaSm8

What would you build? Tell us in the comments.

31/08/2026

Finally connected! 🎉

The phone found our PB-03F + Ra-01S prototype over Bluetooth, connected successfully, and received the returned data.

Great to see Ai-Thinker represented at the LoRa Global Ecosystem Forum during IOTE 2026 in Shenzhen.Our R&D leader, Sky ...
28/08/2026

Great to see Ai-Thinker represented at the LoRa Global Ecosystem Forum during IOTE 2026 in Shenzhen.

Our R&D leader, Sky Xu, joined the forum to share Ai-Thinker’s work on end-to-cloud integration and full-stack LoRa IoT solutions.

For us, the discussion was not only about wireless modules. It was also about how devices, gateways and cloud platforms can work together as a more complete deployment path.

Thank you to Semtech for bringing the LoRa community together, and to everyone who joined the session and exchanged ideas with our team.

𝗔 𝗪𝗶-𝗙𝗶 𝗺𝗼𝗱𝘂𝗹𝗲, 𝗮 𝟭.𝟰𝟳-𝗶𝗻𝗰𝗵 𝗱𝗶𝘀𝗽𝗹𝗮𝘆 𝗮𝗻𝗱 𝗮 𝗹𝗼𝘁 𝗼𝗳 𝗰𝗮𝗿𝗲𝗳𝘂𝗹 𝗱𝗲𝗯𝘂𝗴𝗴𝗶𝗻𝗴 𝗯𝗲𝗰𝗮𝗺𝗲 𝘁𝗵𝗶𝘀 𝗺𝗶𝗻𝗶 𝗻𝗲𝘁𝘄𝗼𝗿𝗸 𝗰𝗹𝗼𝗰𝗸.https://github.com/Ai-...
27/08/2026

𝗔 𝗪𝗶-𝗙𝗶 𝗺𝗼𝗱𝘂𝗹𝗲, 𝗮 𝟭.𝟰𝟳-𝗶𝗻𝗰𝗵 𝗱𝗶𝘀𝗽𝗹𝗮𝘆 𝗮𝗻𝗱 𝗮 𝗹𝗼𝘁 𝗼𝗳 𝗰𝗮𝗿𝗲𝗳𝘂𝗹 𝗱𝗲𝗯𝘂𝗴𝗴𝗶𝗻𝗴 𝗯𝗲𝗰𝗮𝗺𝗲 𝘁𝗵𝗶𝘀 𝗺𝗶𝗻𝗶 𝗻𝗲𝘁𝘄𝗼𝗿𝗸 𝗰𝗹𝗼𝗰𝗸.
https://github.com/Ai-Thinker-Open/.github/discussions

🐾 One distracted moment can be enough for a curious pet to wander farther than expected.A geofence alert does not physic...
26/08/2026

🐾 One distracted moment can be enough for a curious pet to wander farther than expected.

A geofence alert does not physically stop the pet. It gives the owner an earlier reason to check the latest location and begin searching.

Swipe through this short story to see the workflow. 👀

Where would this be most useful for you: a daily walk, a park or an outdoor trip?

Follow Ai-Thinker for more finished IoT product ideas.
Comment "PET" for product information.

25/08/2026

✨😏We connected PB-03F and Ra-01S for an early hardware prototype.

Need dual-band Wi-Fi and Bluetooth, but the custom PCB is not ready yet?The first questions are often more basic: how wi...
24/08/2026

Need dual-band Wi-Fi and Bluetooth, but the custom PCB is not ready yet?

The first questions are often more basic: how will the team power the board, load firmware, and reach the required interfaces?

NodeMCU-BW60-12F-Kit provides Type-C power, Reset and Flash controls, onboard LEDs, and 21 I/Os by default in a DIP-30 board format. It can support those early checks before the team moves to custom hardware.

Available pin functions depend on the module configuration and multiplexing used in the project.

Which test comes first in your workflow: Wi-Fi, Bluetooth, or GPIO?

Comment "BW60" for product information or the sample request form.

Too many wires? Just build a board. 🔧For this LoRaWAN node prototype, we paired the Ra-01S LoRa module with the PB-03F B...
20/08/2026

Too many wires? Just build a board. 🔧

For this LoRaWAN node prototype, we paired the Ra-01S LoRa module with the PB-03F BLE module.

Flying wires worked for the first test—but with multiple SPI and control connections, things quickly became messy. So we designed a compact carrier PCB and soldered both modules directly onto it.

Much cleaner. Much easier to debug. Now it’s ready for the next stage of development.

Address

香港新界沙田區沙田火炭山尾街18-24號沙田商業中心12樓06房
Shenzhen

Opening Hours

Monday 08:30 - 18:00
Tuesday 08:30 - 18:00
Wednesday 08:30 - 18:00
Thursday 08:30 - 18:00
Friday 08:30 - 18:00

Telephone

+8675529162996

Website

,

Alerts

Be the first to know and let us send you an email when Ai-Thinker posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Ai-Thinker:

Shortcuts

Share