ANOUR

ANOUR is a Copenhagen based lighting brand, specializing in bespoke handcrafted LED lamps. www.anour.dk

07/10/2026

T-MODEL - A reinterpretation of the classic desk lamp, with a form that holds its place in any setting. A tilting shade directs and diffuses the light, and the dimmer sets the level for the hour and the task.

It belongs on a desk, a bedside table or a shelf, in the bedroom, the dining room or the office. Available in three brass surfaces: polished, brushed and browned.

Handcrafted in Denmark and made to order.
Explore T-MODEL on anour.dk

Photo: .sor

06/10/2026

A kitchen by our partner , set on wide-plank oak floors by . Smoked timber, travertine and pale oak make up a palette of dark and warm tones with the grain left visible. The lighting follows the same logic.

Donya Pendants hang at table height, in bronze tones that mark out the dining area without closing off the room. The I-MODEL Cordless runs along the island as a single clean line and places light on the work surface where it is needed.

Our lamps are handcrafted in our workshop in Rødovre, and positioned with the architecture in mind, so the light belongs to the room from the first drawing.

Kitchen cph
Floors and Photography credits:

01/10/2026

I-MODEL Aura brings work light and ambient light together in one fixture. A down-facing light serves the task at hand, while a second source at the top sets the mood of the room, and the light source itself stays out of sight.

It is the first in the I-MODEL family to do both, in the same linear form the I-MODEL is known for. Designed with kitchen islands and higher workspaces in mind, it removes the need for ceiling spots.

Explore I-MODEL Aura on anour.dk

30/09/2026

Donya Pivot Wall is a sculptural piece for the wall, with a head that rotates to suit the room. It can give a soft, ambient light or a directed accent on an artwork or an architectural detail. Part of the Donya family, named after the Farsi word for "the world",available with or without onyx shade.

Explore Donya Pivot Wall via the link in bio.
Photo: .sor / styling

28/09/2026

ANOUR lamps are shaped and finished by hand in our workshop in Rødovre. Brass, copper and steel are worked into their final form by craftspeople who know the material. Each lamp is assembled by hand, and each surface is given the time it needs. It is this attention to detail that allows an ANOUR lamp to stand the test of time.

Book a private visit to our workshop and see the craft firsthand. Link in bio.

24/09/2026

Last week we spent an evening with our retail partner .is , together with some of Iceland's best architects and designers. We walked through how our lighting is actually made, from the workshop floor in Rødovre to the materials we choose and the reasons behind each one.

Thank you to the whole VEST team for having us, and for such a warm evening in Reykjavík.

17/09/2026

PARS Horizontal, in onyx and brushed brass, above the island in this Hellerup project.

The full renovation and interior design is the work of , full-service from architecture to furnishing. The kitchen itself, along with the bespoke carpentry throughout the home, was built in-house: oak cabinetry, glass-front joinery, brass hardware fitted by hand rather than sourced off the shelf.

It's a way of working we recognise. Each PARS lamp is shaped from a single block of onyx, cut and polished until the stone's own veining becomes part of the design rather than something to work around. No two pieces come out the same, the same way no two slabs of oak in this kitchen read quite alike.

Placed above the island, the lamp's onyx body picks up the same warmth as the wood and herringbone floors around it, while the brushed brass fittings echo the cabinet hardware throughout the room. Two different crafts, working from the same instinct: let the material lead.

Designed and made in Denmark.
Credits: / Photography:

14/09/2026

A glimpse from our Rødovre workshop: brass and white onyx stone taking shape for a new order of PARS Wall lamps.

The onyx arrives as raw stone, its grain only fully visible once cut and polished, no two pieces reading quite the same way. Alongside it, the brass fittings are shaped to hold the stone in place, then finished by hand before the two come together.

It's slow, deliberate work, and most of it happens out of view. If you'd like to see it in person, book a visit to our workshop via our linkin.bio

10/09/2026

Above the island in this Japandi kitchen by : I-MODEL Aura. Two light sources in one lamp, a down-facing work light for the counter below and a softer ambient glow from the top, so one lamp does the job of two.

The kitchen is FSC-certified oak and marble, built by . Our I-MODEL Aura fits into that same register: quiet, no unnecessary detail, made to be used every day rather than admired from a distance.

Design:
Kitchen:

08/09/2026

In the hallway of this Copenhagen apartment by DONYA Pivot Ceiling Triple does the quiet work. Three heads, one canopy, each one turning independently to send light exactly where it's needed.

Handcrafted in our Rødovre workshop from browned brass. Like everything else in this home, it's built to be lived with.

Credits:

Adresse

Bredgade 28A
Copenhagen
1260

Telefon

+4533607070

Website

http://anour.dk/

Underretninger

Bliv den første, der får besked: Vi sender dig en e-mail, når ANOUR offentliggør nyheder og tilbud. Din e-mailadresse bliver ikke brugt til andre formål, og du kan til enhver tid afmelde dig.