Awesomatix U.K.

15/05/2026

Build the A12X damper with Lucas 😎

Watch our team driver Lucas Urbain build the rear damper for the A12 platform.Follow us on Facebook https://www.facebook.com/AwesomatixRC Follow us on Instag...

28/04/2026

Latest body mounting info!

ℹ️🆕⚙️ Bodyshell Mounting Infos UPDATE ⚙️🆕ℹ️

Check out our Bodyshell Mounting infos for some of the latest new releases 👍
Available at https://www.awesomatix.net/manuals and PETITRC

TC (A800R/A800RR):
LensBodies Ghibli 3.0
ZooRacing JACKAL
Avalon Racing VORTEX

FWD (A800FXR):
Mon-tech racing GR-C
Bittydesign A3-F

05/04/2026

Build the AFS for the A12 platform with Lucas!

Our team driver Lucas Urbain guides you through the steps of putting together the Adjustable Front Suspension set for the A12 platform.Follow us on Facebook ...

02/04/2026

Updated blank setup sheet for the A12X now featuring the AFS options - the team will be using this updated sheet moving forwards 👍

⚙️🆙 Awesomatix A12X Editable Setup Sheet update 🆙⚙️

Update sheet includes the following improvements:
- AFS Suspension parts / settings
- outer frame selection field
- updated rear spring selection
- updated side spring selection
- updated tire sauce info (width in mm.)
- updated tire sidewall glue selection
- updated "Tab and Enter" key navigation from field to field and check boxes

Available for download at PETITRC and on our homepage:
https://www.awesomatix.net/manuals

03/03/2026

Fresh new goodness on the way 👍

↗️🆕 NEW PRODUCTS 🆕↖️

➡ C127S-1.6 Top Deck
C127S-1.6 Top Deck for use with AM177 Motormounts.
Special Version made from 1.6mm Carbon Material.
Recommended for lower grip conditions to enhance more overall grip.
IMPORTANT NOTICE: We recommend the use of ST24S ball studs to secure the rear toe links to ensure adequate clearance between top deck screws and toe links ball studs.
Alternatively, the kit’s ST24 ball studs can be shortened/sanded down to provide the required clearance.

➡ C127SR-1.6 Top Deck
C127SR-1.6 Top Deck for use with AM177 Motormounts.
Special Version made from 1.6mm Carbon Material.
Recommended for lower grip conditions to enhance more overall grip.
This version is intended to be used in the rear of the car, as it includes a bulkhead brace which increases rear end grip.
IMPORTANT NOTICE: We recommend the use of ST24S ball studs to secure the rear toe links to ensure adequate clearance between top deck screws and toe links ball studs.
Alternatively, the kit’s ST24 ball studs can be shortened/sanded down to provide the required clearance.

➡ P03XR Arm Ball Cap x 5
Awesomatix P03XR Arm Ball Cap x 5
This version features an enlarged top opening to ensure proper clearance for the upper keyhole on AT21 models. In addition, it includes a small recess on the top lip to allow easier removal of optional Suspension Arm O-Rings (OR14V).
Successor and replacement for P03 and P03X.

➡ SPR12XR-C0.8L Rear Spring long C0.8
Awesomatix A12X Rear Spring Long C0.8 Silver. This version is 0,7mm longer, to provide bigger preload at setting of GUD (Gap Under Damper) when using AM1204XT or AM1204-WC Chassis plate in A12X car.

14/12/2025

Continued strong results from the 1/12th team 😎

01/12/2025

Some very cool new stuff that's already been used with some success in the UK 👍

↗️🆕 NEW PRODUCTS 🆕↖️

➡ AFS Adjustable Front Suspension Set
The optional A12-AFS set is our next-generation front suspension system for the A12X / A12WC platforms. Its main advantage: you can adjust caster, camber, ride height and droop with the front wheels installed - without changing any shims, caster posts or any disassembly.
Important: The A12-AFS set cannot be used with the standard C1205X or C1201X components.

Key Feature:
- Full front-end tuning without removing the wheels.
- Faster, cleaner adjustments compared to traditional 1/12 pan-car suspensions.
- Compatible with standard 1/12 setup stations or an angle gauge for camber.
- Camber range: ±1.75°
- Selectable caster angles: 3°, 4°, 5°, 6°
- Stepless ride-height adjustment
- Stepless downstop adjustment

Compatibility & Required Parts:
Servo plate and suspension plates are not included.
To run the AFS system, choose the correct AFS suspension plates + a matching AFS servo plate for your needs/conditions.
Suspension / Servo plate pairing:
- C1205AFS → use with C1201AFS
- C1205AFS-1.5 → use with C1201AFS-1.5
- C1205AFS-5.0 → use with C1201AFS-5.0
Manual is available under: www.awesomatix.net/manuals

➡ AT1220 AFS Servo Plate Spacer for Mini-Servos x 2
Optional Awesomatix AT1220 AFS Servo Plate Spacer for Mini-Servos x 2
This Spacer is needed for the AFS set in case you want to use a 15mm thick Mini Servo.

➡ AT1220-1.7 AFS Servo Plate Spacer for SRT M11 Servo x 2
Optional Awesomatix AT1220-1.7 AFS Servo Plate Spacer for SRT M11 Servo x 2
This Spacer is needed for the AFS set in case you want to use the SRT M11 Servo.

➡ C1201AFS Servo Plate
Awesomatix C1201AFS Servo Plate for AFS set. Use with C1205AFS Suspension Plate.

➡ C1201AFS-1.5 Servo Plate
Awesomatix C1201AFS-1.5 Servo Plate for AFS set. Use with C1205AFS-1.5 Suspension Plate.

➡ C1201AFS-5.0 Servo Plate
Awesomatix C1201AFS-5.0 Servo Plate for AFS set. Use with C1205AFS-5.0 Suspension Plate.

➡ C1205AFS Suspension Plate
Awesomatix C1205AFS Suspension Plate for AFS set. This Suspension Plate matches the same wheelbase as the C1205-X.
C1205AFS requires the use of C1201AFS Servo Plate.

➡ C1205AFS-1.5 Suspension Plate
Awesomatix C1205AFS-1.5 Suspension Plate for AFS set. This Suspension Plate offers -1.5mm shorter wheelbase compared to C1205AFS.
C1205AFS-1.5 requires the use of C1201AFS-1.5.

➡ C1205AFS-5.0 Suspension Plate
Awesomatix C1205AFS-5.0 Suspension Plate for AFS set. This Suspension Plate offers -5.0mm shorter wheelbase compared to C1205AFS.
C1205AFS-5.0 requires the use of C1201AFS-5.0.

30/11/2025

Great news to officially have Chase and Adam on board - just reward for their efforts in the past year 😎

🚀🔥🇬🇧 Mackman Joins Awesomatix! 🇬🇧🔥🚀

We’re excited to welcome 15-year-old UK talent Chase Mackman to the Awesomatix Team.
With podiums at the BRCA LMP Nationals and back-to-back Junior National Championships, Chase has already proven himself as one of the most promising young LMP drivers in the country.
Together with his father Adam who shares his experiences and supports Chase with everything needed, they are a strong force!

Top Achievements:
-Podium finish at BRCA LMP Nationals Round 1
-Two-time BRCA LMP Junior National Champion
-Strong results across major UK LMP events

Chase will be present at the BRCA LMP Nationals series and maybe more events across Europe

Chase’s words:
“Super happy to be joining Team Awesomatix. I've been running the car for over a year now and it has bought me great success. I'm really looking forward to continuing the hard work with my fellow teammates and attending any future races.”

27/11/2025

Not only one of the most consistently popular 1/12 platforms in the UK, but also fully backed up with spares too!

Awesomatix A12X - 100% spares availability!

https://www.rccarshop.co.uk/A12X?*brand=22&take=26

14/11/2025

New parts on the way!

↗️🆕 NEW PRODUCTS 🆕↖️

➡ ZA Zero Ackermann Set for A800FXR
The optional Awesomatix ZA (Zero Ackermann) set is designed for the Awesomatix A800FXR front-wheel drive car. This set allows you to test and use three different Ackermann levels:
#1 Almost zero Ackermann - potentially gives an advantage on high-speed tracks with mostly fast, big-radius turns.
#2 Low Ackermann - intermediate between #1 and #3 Ackermann setting.
#3 Normal Ackermann - close to the standard A800FXR car Ackermann setting.
Manual is available under: www.awesomatix.net/manuals

➡ AM1204X-STS Chassis Plate
Awesomatix AM1204X-STS Chassis Plate.
This optional AM1204X-STS soft steel chassis is a modified and updated version of the former AM1204X-ST chassis and provides similar vertical rear suspension stiffness as the AM1204WC aluminum chassis.
It requires 4pcs ST112-5 centering screws (not included) for the installation of the Motormount/Bulkhead.

➡ AM14FX-LA Steering Arm ZA x 2
Awesomatix AM14FX-LA Steering Arm ZA x 2
Hole #1 - noticeably less Ackermann and slightly less maximum steering angle compared to AM14-FX
Hole #2 - slightly less Ackermann and less maximum steering angle compared to AM14-FX
Hole #3 - slightly more Ackermann and slightly more maximum steering angle compared to AM14-FX

➡ AM180FX-LA Bellcrank ZA
Awesomatix AM180FX-LA Bellcrank ZA

➡ OR1306V Damper Case O-Ring x 4
Awesomatix OR1306V Damper Case O-Ring x 4
For AM240-D4 Damper Cover. Black colour O-Ring.

➡ ST321 ZA Pivot x 2
Awesomatix ST321 ZA Pivot x 2.

➡ ST344 ZA Links x 2
Awesomatix ST344 ZA Links x 2

➡ ST345 ZA Stud
Awesomatix ST345 ZA Stud