Pastor Russ's Workshop

Pastor Russ's Workshop I make pens, bowls, clocks, cabinets and other things in my workshop. You can email or call with questions.

I made two of these Toddler beds. A crib mattress fits in them. The bottom supports are just laid on supports in the s...
04/14/2025

I made two of these Toddler beds. A crib mattress fits in them. The bottom supports are just laid on supports in the sides and the ends and sides are slitted and slide together .

I found a plan for this star made out of 2x4’s. I cut the pieces according to the instructions and it didn’t fit! The ...
04/01/2025

I found a plan for this star made out of 2x4’s. I cut the pieces according to the instructions and it didn’t fit! The short pieces needed to be an inch shorter than the plan, I recut them and here it is: looking like a star! It’s about 15” tall and 15.75 wide.

These are 6” tall and 3” diameter. The two on the left are Bubinga, on the right are Chakta Viga! They are nice colors b...
03/31/2025

These are 6” tall and 3” diameter. The two on the left are Bubinga, on the right are Chakta Viga! They are nice colors but I’m not sure what to use them for other than decoration!

I have been using the laser to cut some more of these crosses with a nativity scene on them.
03/21/2025

I have been using the laser to cut some more of these crosses with a nativity scene on them.

Playing with some different Easter designs. Jesus praying is about 5.5” square, Jesus on the cross is about 5” square, a...
03/12/2025

Playing with some different Easter designs. Jesus praying is about 5.5” square, Jesus on the cross is about 5” square, and the “He is Risen” is about 3” wide and 4.25 tall. It can be used as a pencil holder or it could have a tea candle in it.

Question: which do you like better; satin or gloss? It is the same bowl in both pictures.
03/07/2025

Question: which do you like better; satin or gloss? It is the same bowl in both pictures.

I think this is a “pretty” nice cutting board! It is bubinga and canary wood; measures 13.25 by 23.25 and is about 7/8”...
03/05/2025

I think this is a “pretty” nice cutting board! It is bubinga and canary wood; measures 13.25 by 23.25 and is about 7/8” thick.

I hesitate to post this cutting board wondering how many scammers I will have ask about it! It measures 14” high and 18...
02/28/2025

I hesitate to post this cutting board wondering how many scammers I will have ask about it! It measures 14” high and 18” wide, I had a couple boards slip during glue up so it is thinner than I expected! It looks good, so I will make a couple more in the future!

These cutting boards are 13”by 17” . I used some hickory instead of maple on 4 of them. I used walnut and cherry, too!...
02/26/2025

These cutting boards are 13”by 17” . I used some hickory instead of maple on 4 of them. I used walnut and cherry, too! I now have the three sizes I usually make: 11 by 14; 13 by 17; and 14 by 20. They sell for: $45, $55, or $65 each.

02/24/2025

I just received a message from Facebook (???) stating that I have trademark violations and my page will be shut down! If I disappear, I will share my projects on my personal page. I’m not sure if this is real or a scam, just putting some info out.

I just did the final wipe down on these 8 cutting boards. They are 11” by 14” and are priced at $45 each.
02/22/2025

I just did the final wipe down on these 8 cutting boards. They are 11” by 14” and are priced at $45 each.

I just put the first coat of oil on these boards. They are made mostly with ‘cut off’ pieces that I have been accumulat...
02/18/2025

I just put the first coat of oil on these boards. They are made mostly with ‘cut off’ pieces that I have been accumulating! Six of them are 14x20, the other two are 10.5x16.

Here is a picture with my containers of grain and a picture of the completed clocks. It doesn’t take very much grain to ...
02/14/2025

Here is a picture with my containers of grain and a picture of the completed clocks. It doesn’t take very much grain to fill them but it takes a little fussin’ to get the flax and canola so they won’t settle too much in the future. The rest of the grains fill in pretty good!

I finished these basket weave bowls a couple days ago. The one on the left is oak and walnut, the others are cherry and ...
02/13/2025

I finished these basket weave bowls a couple days ago. The one on the left is oak and walnut, the others are cherry and walnut. The center one is for Cheryl. I’m also working on 5 grain clocks, they are ready to put the 12 different grains in the pockets for each hour.

I finished the assembly of these two chairs, now they’re ready for some polyurethane! I made one like this last fall so...
01/23/2025

I finished the assembly of these two chairs, now they’re ready for some polyurethane! I made one like this last fall so we will now have 3 made out of the redwood from the pole barn that collapsed a couple winters ago!

I was asked if I could use my laser to engrave on deer antler; it looks like the answer is “yes”! It also looks like I ...
01/20/2025

I was asked if I could use my laser to engrave on deer antler; it looks like the answer is “yes”! It also looks like I have a pen!

I’ve had this 3” square 6” tall piece of Paduch wood for a couple years! I decided to put it on the lathe yesterday mor...
01/17/2025

I’ve had this 3” square 6” tall piece of Paduch wood for a couple years! I decided to put it on the lathe yesterday morning and this is what it became!

I finished these seam rippers today. The two wooden ones are Mesquite and are spoken for. Each one has two seam ripper...
01/10/2025

I finished these seam rippers today. The two wooden ones are Mesquite and are spoken for. Each one has two seam ripper ends and sell for $30. The two purple ones are sold!

Address

8739 1st Street NE
Glenfield, ND
58443

Telephone

+17016501493

Website

Alerts

Be the first to know and let us send you an email when Pastor Russ's Workshop posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Pastor Russ's Workshop:

Shortcuts

Share

Category