Schadow Forge

06/17/2026

This is Talhundereth. After a month of printing and a whole lot of sanding the build part is finally finished. I have a few upper walls I want to add in the main hall but it's time to start painting. I also need to create a lot of rubble from a collapsed ceiling in a couple areas. Since this build was all 3D printing I chose not to video this one.

06/09/2026

Been working on my next map. It's a large Dwarven temple so I'm making rooms in different pieces that I will lay down when entering.

05/23/2026

This is it. The final video in this series. It only took 19 parts. But it is finished.

Well, here it is. The final video for Crafting Zorzula's Rest. Here I glue in some of the fixtures like the mine cars and tables, benches and any other last ...

05/21/2026

Time to place the mine car track.

In this video I work with the mine car tracks. The tracks are resin printed and primed with brown primer. Here I paint the rails with Deco Art Zinc paint the...

05/20/2026

I finally got to the painting portion.

And so it begins. Finally have made it to the painting portion. For...

05/19/2026

Got a new video up and should be a good one. I demonstrate texturing foam to look like rock.

This is a good one. In this video I am texturing all of the rock surfaces. I use a piece of rock I 3D printed that I use by hand or attach to a hammer and be...

05/15/2026

Now that the map is finished I can crank out the crafting videos. 😁
Here I plan out the upper level layout.

In this video I spend some time laying out the walls so they are close to what the map is. It wasn't going to work out with the doors that were 2" wide so I ...

05/15/2026

Last little bit of the lower Mine.

In this video I wrap up all the remaining pieces of the mine. And I...

05/14/2026

Got another video up. Gluing the base together.

The base pieces are all cut out. It's time to glue it together. I start at the bottom and work my way up.I'm using Gorilla Glue Construction Adhesive because...

05/13/2026

I got another video up. Cutting out the slopes.

In this video I cut out all the slopes connecting the different levels and make a plan on gluing all the layers together. Thanks for watching. Please like an...