FrawstedCreations

09/08/2026

Everybody poses their 12-footer. Almost nobody knows which poses are quietly cracking the shoulder joint. We print the replacement parts, so we see the same three breaks over and over. Here are 10 poses worth doing — plus what each one does to the joints, and how to keep yours in one piece through October.

10 poses for your 12 ft skeleton, ranked by how hard they are on the joints — plus the three connectors that break first and how to replace them.

08/15/2026

The best jump scare is the one nobody chose to trigger.

Our Try Me step pad hides under a doormat, a pile of leaves, or the third stair — and fires your animatronic the second someone steps on it. Standard 1/8" (3.5mm) jack, so it plugs straight into most Home Depot and Spirit props. Cable runs from 10 to 100 feet.

Single, 2-pack or 4-pack, from $32.50.

frawstedcreations.com

08/14/2026

A little shop talk.

Most 3D printed things you'll find online are PLA. PLA is cheap, prints beautifully, and starts going soft around 130°F — which is roughly the inside of a car window, or the sunny side of a skeleton's shoulder in September.

So every outdoor part we make — skeleton connectors, spider sockets, step pads — gets printed in PETG instead. It holds its shape past 175°F and it flexes instead of snapping.

It costs us more and prints slower. It also means the part you buy in August is still holding in October.

frawstedcreations.com

08/13/2026

If your 12 ft Inferno Pumpkin came out of storage with a wobbly head or a floppy arm, you're not alone — those connectors are the first thing to go.

We print replacements in PETG that fit the Home Depot original exactly. Head/neck, left arm, right arm, male or female. $11.50 each.

One evening of work now beats a headless pumpkin in October. 🎃

frawstedcreations.com

08/12/2026

The twist tie was never going to survive. This little guy will.

Our Corgi Butt Bread Clip is a reusable 3D-printed bag sealer that keeps bread fresh and makes everyone in your kitchen do a double take. $8.99.

Also available as a sloth, if you prefer your kitchen slower.

frawstedcreations.com

08/11/2026

He's been folded in a tote since November — and something in there is cracked. It always is.

Our 12 ft Home Depot skeleton elbow brackets are printed in PETG (the stuff that doesn't go soft in the sun) right here in Utah. Male, female, or both. $11.50, free shipping.

Fix him now, not the week of Halloween when your neighbor's is already up. 💀

frawstedcreations.com

03/24/2026

Morning printer rotation! Clear some beds with me 😊